Your cart is currently empty.
Arizer Batteries meet rigorous quality standards. With normal use they will last for hundreds of charge cycles before losing any capacity. Dropping the battery or the unit can result in battery damage that may limit / reduce the battery capacity quickly, so it is important to handle the batteries and your unit carefully.
Depending on the temperature setting and general usage patterns the ArGo battery will typically last for 1.5 hours of use per charge. The battery will take 3.5 hours to fully charge, or longer if you use it while charging.
If your battery is running low, with the ArGo you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (15-20 minutes) and then you can set the temperature and use the ArGo while the battery continues charging. Note: The ArGo will not operate if the battery is completely drained.
An easily interchangeable battery allows you to have some spare batteries fully charged as a back-up for when your battery is running low and for extended use on the go.
The ArGo and ArGo Chargers have built-in protections to prevent the battery from being overcharged or drained too low. To conserve battery life, use the ArGo in a temperature controlled environment and use the lower temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures. Charge the battery as necessary. Do not store the battery fully charged or fully drained for longer than one month (store with partial charge).
Arizer Batteries should not be substituted for third-party batteries — Only use official ArGo Batteries with your ArGo. We cannot verify the quality or safety of other batteries, and using third-party batteries can result in personal injury, electric shock, and damage to the device which is not covered under warranty.
The Control Panel consists of the OLED and three buttons: the Menu button and the plus (+) & minus (-) buttons. Use the Menu button to navigate through the different settings and the plus & minus buttons to adjust them.
The ArGo’s optimized heating system warms up fast and has a wide temperature range of 50°C-220° C (122°F- 428° F). The temperature is adjustable in 1-degree increments and 10-degree increments.
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is activated, a beep will be heard when the Argo is powered on or off. If the Audio / Beep is deactivated, the Argo remains silent when powered on or off.
This function has three volume settings and can also be turned off. If the Temperature Alert is activated two beeps will be heard when the set temperature is reached.
The power-on delay safety feature ensures you don’t accidentally turn on the unit and has four settings for your convenience: 2 seconds, 4 Seconds, 6 Seconds, and 8 Seconds. The default setting is 6 seconds.
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5–15 minutes in one-minute increments. The default setting is 10-minutes.
The ArGo display can be set to Celsius or Fahrenheit. The default setting is Celsius.
The ArGo’s display has three brightness settings: low, medium, and high. The default setting is medium.
A full range of parts and accessories to equip and protect your Air II are available for purchase here.
If you can’t find the part you need send us an email to: service@arizer.com with a description of the part you need.
Equipped for worldwide use with an input capacityof 110-240V and international safety certifications.
Leave us a voice message and we'll get back to you ASAP
888-291-0521
Interested in becoming a Retailer or Distributor?
Click Here
Free Shipping in US on Orders of $100 (tax excluded) !